IMEI FIXING PROCEDURE–
==>1. First your phone must be properly rooted because chamelephon needs root access to be able to alter your imei.
==>2. Download and install Chamelephon from MY LINK
==>3. If you mean to change your imei instead of repair, dial *#06# to copy out your original imei for safe keeping.
chamelephon ui
Chamelephon UI
==>4. Open the installed Chamelephon and an interface like the one above will be shown. Click on Authorize if asked for root access as seen below
Authorize chamelephon root access
Note: To alter imei with chamelephon, you must have to provide two valid imei for both spaces provided. Meaning to change imei of sim one, you must change that of sim 2 as well.
==>5. Click on Generate random IMEIs and select Apply New IMEIs. Or if you have your own imei, you can paste them in the spaces provided and hit same Apply button. Then confirm the change.
confirm imei change
Confirm
imei change success message
Success
==>6. Finally, reboot your phone as required or simple turn ON and OFF your Airplane/Flight Mode for the imei to take effect.
new imei
New Imei
That’s all you have now successfully changed your imei using Chamelephon. Dial *#06# to check it. You can use the comment box for any question you may have. Enjoy!
NVRAM FIXING(K50A40 ONLY)–
first you should download MIRACLE BOX+LOADER and NVRAM FILE from my link…..
((Miracle Box is the best solution for backing-up, restore, unlock, write IMEI/NVRAM and flash several stock- and custom-ROMS, Apps & Tools.
This version includes the loader, which makes the dongle/Box unnecessary!
HOW TO FLASH MTK ANDROID DEVICES USING MIRACLE BOX
Author: RomShillzz
Using the Miracle Box is quiet complicated to some people, although to some its easier!
On this post i will show you on how to flash MTK Android devices Using Miracle Box.))
Install Miraclebox on pc–
Install the “Miracle Box v2.27A.exe” to PC-root-directory (e.a. C:Program FilesMiracle Box) (uncheck “read” and “start Miracle Box” after installation! So, just close the installer!)
(“PL2303_Prolific”- driver will be installed automatically)
-Copy and paste all files within the “Miracle Box v2.27A Loader” (replace)
-Right click and open as admin on Miracle_Loader_2.27A.exe (which u´ve copied to the installation-folder)
After installing just do this–
Open miraclebox , go to mtk tab and select nv write , give NVRAM file location then do start the process by clicking start button after this switch off your phone and connect it to the pc via data cable. After some time the process is completed and a 100% completed box shown. Just disconnect the phone and switch on and yeppeee the nvram error was fixed!!!!!!
